Welding is a valuable skill, but it can create invisible hazards, i.e., welding fumes. These fumes contain tiny particles of metal oxides, gases, and other nasty stuff that can irritate your lungs. Welding fumes lead to serious health problems over time. That's where you should use a
welding fume extractor. It acts like a silent guardian against these microscopic foes by keeping the air in your workplace clean and safe.
However, just as any superhero needs a strong support system, your welding fume extractors require correct installation and maintenance to perform optimally. Here are some simple tips for installing and maintaining them properly:
Some Tips for Better Installation & Maintenance of Your Welding Fume Extractors
You Need to Choose the Right Location
-
Place the fume extractor as close to the welding area as possible and make sure no obstructions are blocking the airflow.
Follow the Manufacturer's Instructions
-
You must read the installation manual carefully before starting
-
Remember to follow all the instructions step by step as mentioned in the installation guide for your welding fume extractors.
Proper Ventilation is Necessary for Your Welding Fume Extractors
-
Your welding fume extractor must be connected to a proper ventilation system.
-
Make sure there is enough airflow to remove all the fumes.
You Have to Do the Regular Maintenance
-
Clean the filters regularly according to the manufacturer's recommendations.
-
Check for any damage or wear and tear and replace parts as needed.
Monitoring the Performance of Welding Fume Extractors is Essential
-
It is mandatory to regularly check to make sure the fume extractor is working properly.
-
If you notice any decrease in performance, inspect the unit for any issues.
Train Your Staff to Use & Fix the Minor Issues
-
This is your responsibility to make sure that your employees know how to use the welding fume extractors correctly.
-
Also, train them on how to spot any problems and what to do in case of an emergency.
You just need to follow these simple installation & maintenance tips and you can make sure that your
welding fume extractor are working efficiently. If you still have any queries, reach Aerolube. Our experts will guide you thoroughly. Even if you need installation services, we will do that too. Aerolube is basically an elite provider of welding fume extractors and services that are related to it. Connect with us for a comprehensive services package.